You are browsing the archive for configmgr2007.

Configuration Manager 2012 OSD : Only import the Intel chipset drivers you really need for your brand/model !

6:31 pm in ConfigMgr 2007 R2, ConfigMgr 2012, configmgr 2012 R2, ConfigMgr 2012 SP1, ConfigMgr SP2, configmgr2007, Deployment, Drivers, Operating System Deployment, OSD, sccm, SCCM 2007, SCCM 2007 R2, SCCM 2007 R3, SCCM 2007 SP2, SCCM 2012, sccm 2012 R2, SCCM 2012 R2, SCCM 2012 SP1, sccm RTM, sccm2007 by Kenny Buntinx [MVP]

 

Yesterday I wrote a blogpost about the reason to keep your “Driver DB” and “driver packages” as clean as possible and that you do not need to import all the junk they provide in those so called “enterprise driver packages” for multiple models.

As a first tip for helping you accomplish that , we show you in this blog post how we can limit the number of *.inf files we need to import from Intel(R) Chipset Device Software . When downloading and extracting that Intel(R) Chipset Device Software package you will see that originally there are about  98 inf files present :

image

Now reduce the number of INF files :

Two override command switches for setup.exe from Intel(R) Chipset Device Software that will help us to reduce the *.inf files we need to import into our “Driver Package” :

-AONLY Extracts the needed INF files to install on the current system. If the install has been run once successfully, ‘-AONLY’ will not return any INFs when used in conjunction with ‘-OVERALL’ switch, all the needed INFs for the system will be extracted.

-P <Installation Path> Specifies the hard disk location to which the INF program files are copied. If this flag is not specified at the command line, the <Installation Path> directory is as follows: C:\Program Files\Intel\INFInst .

If this flag is used without the ‘-A’ option, only the Readme will be copied to <Installation Path>. The directory name can include spaces, but then a pair of double quotes (") must enclose the directory name. There should not be any space between the switch ‘-p’ and the directory name. This flag works in either Silent Mode or Interactive Mode.

Lets execute on the local brand/model that contains an intel chipset :

The result of running the setup with those parameters:

And then the result after running the tool on your local brand/model , you will see that the number of *.inf files are reduced to five (5) items ! isn’t that great ? Now copy those drivers to your regular driver import process and you reduced the number of bloat in your ConfigMgr driver database by 80% at least !

 

image

 

Hope it Helps ,

Kenny Buntinx

MVP enterprise Client Management

How to Install Windows 7 Language packs online during OSD Task Sequence (or in your Hybrid base image)

7:27 am in ConfigMgr, ConfigMgr 2007, ConfigMgr 2007 R2, ConfigMgr 2012, ConfigMgr 2012 SP1, ConfigMgr SP2, configmgr2007, ConfigMgr2007 R3, language Packs, MUI, OSD, sccm, SCCM 2007, SCCM 2007 R2, SCCM 2007 R3, SCCM 2007 SP2, SCCM 2012, SCCM 2012 SP1, sccm2007, Task Sequence, Windows 7, Windows 7 SP1, Windows7 by Kenny Buntinx [MVP]

 

Windows 7 language pack setup, lpksetup, includes parameters to support a managed installation.  I successfully tested the following from the command prompt:

lpksetup.exe /i nl-NL /p . /r /s

I created and advertised a program with this command line, but it quickly failed on a windows7 x64. 

1

The test system returned an error status message, ID 10003: “An error occurred while preparing to run the program for advertisement….  The operating system reported error 2147942402: The system cannot find the file specified.”

Execmgr.log contained the following:

File C:\Windows\SysWOW64\CCM\Cache\…\lpksetup.exe is not a valid executable file
Invalid executable file lpksetup.exe

It turns out that lpksetup.exe on Windows 7 64-bit is a 64-bit-only process so with WOW file redirection in a 32-bit process C:\Windows\System32 redirects to C:\Windows\SysWOW64, which does not contain lpksetup.exe.  So I altered the ConfigMgr program command line to:

%WinDir%\SysNative\lpksetup.exe /i nl-NL /p . /r /s

3

Using the SysNative alias allowed the language pack to be successfully installed on Windows 7 64-bit from a ConfigMgr advertised program or Task Sequence.

The Language Packs are installed successfully as i can choose the installed languages after the installation.

I have got this valuable information from Aaron Czechhowski at http://blogs.technet.com/b/aaronczechowski/archive/2011/12/18/deploying-windows-7-language-packs-via-configmgr.aspx

Hope it Helps ,

Kenny Buntinx

Configmgr 2007 / 2012 : Using AfterBackup.bat to Daily Archive a Backup Snapshot

8:23 am in backup, ConfigMgr, ConfigMgr 2007, ConfigMgr 2007 R2, ConfigMgr 2012, ConfigMgr 2012 SP1, ConfigMgr SP2, configmgr2007, ConfigMgr2007 R3, sccm, SCCM 2007, SCCM 2007 R2, SCCM 2007 R3, SCCM 2007 SP2, SCCM 2012, SCCM 2012 SP1, sccm2007 by Kenny Buntinx [MVP]

 

To ensure that a recent backup snapshot is always available, it is recommended that you archive the backup snapshot every time the SMS backup task completes a backup cycle. The standard backup task overwrites the previous created backup by default .

To accomplish that, you can use the AfterBackup.bat file to run a third-party tool (7Zip) that automatically archives the backup snapshot every time you back up your site. After successfully backing up the site, the SMS backup task runs the AfterBackup.bat batch file. The AfterBackup.bat file integrates the archive and the backup operations, thus ensuring that every new backup snapshot is archived.

All this script does is move the backup folder to a folder named the day of the week. If the destination already exists, then it is deleted first. Resulting in 7 days of backup or more

To use the AfterBackup.bat file

  1. Prepare an ASCII file with commands that archive your backup snapshot, or that perform any other post-backup tasks your site requires.
  2. Name the file "AfterBackup.bat" and save it in the SMS\inboxes\smsbkup.box folder. Now, every time the backup task runs successfully, it will run the AfterBackup.bat file.
  3. Every time after the AfterBackup.bat file archives the site’s backup snapshot, store that archive in a secure location.

Here is an Afterbackup.bat file that will make a daily backup of ConfigMgr Backup, so that you have a full week of backups.

  1. Place the file in the following location :

3

  1. Make sure you copy the 7zip (command line executable) in the root of the directory . When backup is daily ran , you should see this .

2

 

Hope it Helps ,

Kenny Buntinx

Configmgr 2012 : How to create custom boot images that will support #VMware’s native VMXnet3 NIC

8:46 pm in ConfigMgr, ConfigMgr 2007, ConfigMgr 2012, ConfigMgr 2012 SP1, ConfigMgr SP2, configmgr2007, ConfigMgr2007 R3, sccm, SCCM 2007, SCCM 2007 R2, SCCM 2007 R3, SCCM 2007 SP2, SCCM 2012, SCCM 2012 SP1, sccm2007, Vmware by Kenny Buntinx [MVP]

 

Though VMware Tools does not support the WAIK or ADK’s WINPE 3.1 environment, you can take advantage of specific VMware Tools drivers, such as vmxnet3, and pvscsi by creating a customized Configmgr 2007/2012 Boot Image .

To create a customized Configmgr 2007/2012 Boot Image :

  • On your Primary site server Click Start > All Programs > Microsoft Windows AIK > Windows PE Tools Command Prompt to open the Windows PE Tools command prompt.
  • Run this command to create a Windows PE build environment in the WinPE folder.
      • for a 32bit boot wim – copype x86 C:\winpe-x86
      • for a 64bit boot wim – copype amd64 C:\winpe-amd64
  • Install VMware Tools on Windows 2008 and copy the entire contents of the C:\Program Files\VMWare\VMWare Tools\Drivers\pvscsi and vmxnet3 folders to a C:\VMDrivers folders on the virtual machine.
  • From the Windows PE command prompt (<Drive>:\winpe-x86), run this command to mount winpe.wim to the mount folder:
    dism /mount-Wim /wimfile:<drive>:\winpe.wim 1 /mountdir:<drive>:\WinPE_tmp
  • Run this command at the Windows PE Tools command prompt to copy the vmxnet, vmxnet3 (enhanced), and pvsci drivers:
    winpe.wim: dism /image:<drive>:\WinPE_tmp /Add-Driver /driver:c:\VMDrivers /recurse
  • Run this command to save the changes to winpe.wim:
    dism /unmount-Wim /Mountdir:<drive>:\WinPE_tmp /commit

Import your custom bootimages in Configmgr 2007/2012 and distribute them to your DP . Your done !

Hope it Helps ,

Kenny Buntinx

Windows 7 OSD deployment (SCCM or MDT ) and starting with a patched media = More secure & Saves time !

9:03 am in ConfigMgr, ConfigMgr 2007, ConfigMgr 2007 R2, ConfigMgr 2012, ConfigMgr SP2, ConfigMgr V.next, configmgr2007, ConfigMgr2007 R3, Deployment, DISM, OSD, sccm, SCCM 2007, SCCM 2007 R2, SCCM 2007 R3, SCCM 2007 SP2, SCCM 2012, SCCM v.Next, sccm2007, WAIK, Windows 7, Windows 7 SP1, Windows7 by Kenny Buntinx [MVP]

1. Download your patches to a folder

You could always download the patches from the following link http://catalog.update.microsoft.com/v7/site/Install.aspx?referringpage=Home.aspx and save them to a local folder or automate it by the following process :

  • First step will be to install a clean Windows 7 machine without any application . After that process we will run wuauclt /detectnow and install all available updates . You will need to reboot a few times and rerun the wuauclt /detectnow to allow all patches to be installed properly

  • Then run the procedure below for WSUS patch extraction :

Go to C:\windows and open windowsupdate.log in excel. Delimit the file by Tab and space

Run the auto-filter and filter on “Downloading” in column “G”

Select all rows in column “I” and copy the table. Go to new sheet and paste in this in column “B”

We select column “B” and select Data -> text to column en delimit by ‘/’. Now we remove column “B,C,D and E”

Go back to sheet where you imported the “Windowsupdate.log” and select all rows in column “K” and copy the column. Go to the new sheet and paste in column “D”

We select column “K” and select Data -> text to column en delimit by ‘\’. Now we remove column “D,E,F,G and H”

Paste the following formula in column “A” “="Copy H:\" & B2 & "\" & C2 & " c:\Patches\" & D2”

Drag the formula to below , select column A , select all and copy it

Open notepad , paste the text and save as “getpatch.cmd”

Map your drive H: to \\yourwsusserver\WsusContent and run “getpatch.cmd”

Copy your downloaded patches to the location you need them

 

2. Applying the offline patches to the windows 7 media

 

Open up a WINPE command prompt via the WAIK.

Run the following commands in the following sequence .

Dism /Mount-Wim /Wimfile:"F:\DISM\Windows 7 Enterprise SP1 Eng X64 Source\sources\install.wim" /index:1 /Mountdir:F:\DISM\temp

clip_image002

Dism /image:F:\DISM\temp /add-package /packagepath:F:\DISM\Patches (where the patches folder contains your downloaded CBS windows patches)

clip_image004

dism /commit-WIM /Mountdir:F:\DISM\temp

clip_image006

dism /unmount-WIM /commit /Mountdir:F:\DISM\temp

clip_image008

 

3. What if you get an error applying the offline patches?

 

It can happen that there are patches that cannot be applied offline. When that happens, you will get the following error as shown below in the screenshot. In this case KB2533552. Do not worry, the process does not need to run again.

However, please note all patches that couldn’t be applied, so you could keep track of them for later deployment .

clip_image010

To see what is really going on and to verify this is a patch that cannot be applied offline , you should open the DISM.log file and search for the specific update as shown below in the screenshot.

clip_image012

When you look closer at the screenshot, you will see the message “Cannot perform offline servicing with an online-only package “, meaning this patch is not a CBS update and needs to be applied online.

You could always check the update on the following link http://catalog.update.microsoft.com/v7/site/Install.aspx?referringpage=Home.aspx

 

4. Import the image in SCCM or MDT

 

After this process you need to import the source content in SCCM. When done start adding it to the distribution points and wait until it is replicated, preferably with a good naming convention.

After importing the image in SCCM, add it to the DP’s and check if the image is replicated correctly on all selected DP’s.

When it’s done, change the media in the task sequence to use the new patched media. This will allow you to minimize staging downtime.

 

Now you are running from the start with a patched offline media , meaning less deployment time and being more secure when deploying your machines !

 

Hope it Helps ,

 

Kenny Buntinx

SCCM 2007 : Intel AMT–VPRO KVM add-on for SCCM 2007

6:53 am in AMT, ConfigMgr, ConfigMgr 2007, ConfigMgr 2007 R2, ConfigMgr SP2, configmgr2007, ConfigMgr2007 R3, OOB, sccm, SCCM 2007, SCCM 2007 R2, SCCM 2007 R3, SCCM 2007 SP2, sccm2007, Vpro by Kenny Buntinx [MVP]

Have you ever wanted to be able to launch a KVM Remote Control session from within SCCM from AMT version 6.0 or higher ? Have you ever wanted to make use of the Alarm Clock feature in AMT to wake up or turn on a computer at a specific time? Now you can with the Intel® Core™ vPro™ processor add-on for System Center Configuration Manager 2007 SP2  R2 –R3

This add-on for SCCM 2007 brings the same KVM Remote Control capability that was made available last year in our management pack for SCSM 2010.

In addition, we have also added in the ability to set the AMT Alarm Clock from within SCCM 2007.  This capability lets you set up a schedule in AMT to power on a system from a powered off or sleep state at a specified time; even if the system is not connected to the network.

Once installed, there will be a new sub-menu available when you right-click on systems in the SCCM console that will allow you to launch a KVM Remote Control session, or set the Alarm Clock for the selected system.

There are a few requirements for the KVM functionality however :

  1. You will need to have the intel onboard video adapter . It will not work if you use Matrox , ATI , Nvidea video boards
  2. Intel AMT 6.0 or Higher
  3. The machine must be in-band provisioned thru the SCCM client
  4. BUT – KVM remote control is NOT universal across all 2010 Intel vPro platforms. If shopping for a system, ensure it has Intel integrated graphics, vPro processor, and Intel AMT 6.0. Specifically – look for vPro systems that have the following processors
    • Desktop: i5-650, i5-660, i5-670

    • Laptop: i7-620M, i7-640LM, i7-620LM , i7-640UM, i7- 620UM, i5-540M, i5-520M, i5-520UM

 

Download the plugin here : http://software.intel.com/file/37855

 

Hope it Helps ,

 

Kenny Buntinx

Opalis 6.3 : Building a VMware/SCCM Opalis provisioning workflow

7:54 pm in ConfigMgr, ConfigMgr 2007, ConfigMgr 2007 R2, ConfigMgr SP2, configmgr2007, ConfigMgr2007 R3, Deployment, Installation, Opalis, Opalis 6.3, Operating System Deployment, powershell, sccm, SCCM 2007, SCCM 2007 R2, SCCM 2007 R3, SCCM 2007 SP2, sccm2007, Virtual machine, Vmware by Kenny Buntinx [MVP]

Recently we did a customer private cloud project where we used all the system center tooling ( http://www.microsoft.com/systemcenter/en/us/default.aspx) , except for the hypervisor layer , which was VMware .

One of the scenarios that the customer had in mind , was to provision all there virtual servers with SCCM and we had to use Opalis to become the glue between VMware – BMC Remedy and System Center. In the first step of the project we didn’t use the Change request mechanism from BMC Remedy yet. Special thanks to my colleague Gunther Dewit for helping me out on this one .

**** Disclaimer **** – This is a very basic workflow – we will post improvements as we go along – it is for helping people moving forward **** Disclaimer ****

The workflow itself

image

Delivering input

image

The first step in creating a workflow is doing a custom start where we could input some necessary variables . The Custom Start Activity is used to create a generic starting point for Workflows. By adding parameters to the Custom Start Activity it can consume external data which can be passed to downstream Workflow Activities.

image

These are the parameters the workflow needs in further steps.  All the rest of the information that is residing in the data bus of Opalis  .

This input is required, without it, the workflow won’t start. A popup will be presented when starting the workflow.

Now that we have all the necessary input required, we can continue with the creation of the virtual machine. In order to create a virtual machine, we need to provide some parameters, some of them will come from the Custom start step, others will have to be adapted per workflow.

 

Creating the virtual machine

image

image

These are the required parameters.

  • Name: This is the name that will be given to the virtual machine, we will get it from the Custom Start  where we filled in a name.
  • Datastore: This is the datastore that will host the virtual machine disk, we will get it from the Custom Start  where we filled in the datastore.
  • DiskMB: Since it was decided to have a fixed disk with a size of 100GB, we filled it in directly instead of asking it in the first step.
  • DiskStorageFormat: This is the thick or thin format, thin was decided as the default format.
  • MemoryMB: This is the amount of memory that will be given to the virtual machine, we will get it from the Custom Start where we filled in an amount of memory.
  • NumCPU: This is the number of CPU’s that will be given to the virtual machine, we will get it from the Custom Start where we filled in the number of CPU’s we need.
  • CD: It was decided that all VM’s will have a cd drive so we set this to true.
  • VMSwapFilePolicy: This will set the swapfile policy the states where the swapfile will be saved, it was decided to do this in the VM itself.
  • VMHost: This is the physical host where the VM will be hosted, this integration pack cannot provision on cluster yet so you need to choose a physical host.
  • GuestID: This is the OS version that will be installed on the VM.
  • Folder: This is the foldername where the VM will be installed as shown in the ESX console.

You can add more details trough the “optional properties” button. If all goes well, the workflow has created the virtual machine now.

Now we need to change some things on the virtual machine.

 

Getting the network adapter settings from the created virtual machine

image

First we need to change the network settings. The VM name, we get from the Custom Start , since this is a read action, no further settings are needed.

Alternatively, you can specify some filters to narrow the data that you receive back.

Alternatively, you can specify some filters to narrow the data that you receive back.

image

Now we will delete all the network connection that VMware made by default because they are useless to us.

 

Removing the network adapters from the virtual machine

image

image

The Network Adapter name is data that we got back from the read action above and the VM name is still the name entered at the Custom Start .

This will remove all network adapters from the VM, alternatively, you can specify filters if you only want to delete a specific adapter.

 

Adding the production network adapter to the virtual machine

image

Now we need to add a network adapter to the VM. The VM name is still the name we entered at the Custom Start .

image

The NetworkName is the name of the network that you want your network adapter connecting to.

The StartConnected specifies if it will be connected to the network or only added without being connected.

The Type is e1000 as this is the only VMware adapter SCCM can work with.

Now we do another step to get the properties from the newly created adapter so we can use the information to input the computer into SCCM.

 

Getting the production network adapter settings from the virtual machine

image

image

Now that we collected the necessary information for SCCM, we can import the computer into SCCM.

This is done by a powershell script that needs to input parameters, the name and the MAC address.

 

Adding the computer to SCCM

image

Now that the computer is known is SCCM, we need to add it to the collection that has the OSD advertised to it.

image

The is done by the following step.

 

Adding the computer to an SCCM collection

image

In the collection field, you can enter 2 things, either the name of the collection or the ID of the collection. What you enter must match the collection value type. If you enter an ID as shown here, the value type must be ID as well. The same is true for the computer where we use the name from the Custom Start step so the value type is name in this case.

image

Now that the VM is created and provisioned in SCCM, we are ready to deploy the operating system on it.

So let’s power on the VM.

 

Powering on the virtual machine

image

The only thing you need to power on a VM is the name and we still get the from the first step.

image

Now that the VM is booting up, SCCM can start the task sequence to deploy an operating system on the VM.

Meanwhile, we will check the progress in Opalis.

 

Getting the virtual machine deployment status

image

The advertisement ID is the ID as it is known in SCCM and the computer name is still the name as we specified in the first step.

image

Looping the task

Now since the OSD deployment takes some time to complete, we will let the step loop until it gets a result back from SCCM.

image

image

It will recheck every 300 second and will do this 8 times or when it gets back from SCCM that the deployment was successful in order not keep the loop while the deployment was finished faster then in 8 loops.

 

Getting the deployment result

image

Now we need to output the result to any medium you want (logfile, mail, …), I do an output to a text file as an example.

Conditional progress

Now how does Opalis know when to write to which log file?

This can be regulated by double clicking on the arrows. This is the arrow toward the success file.

image

As you can see, it will only follow this arrow when SCCM outputs a succeeded message for the advertisement. If not, it will take the other path towards the failed log file.

 

So , It is not so easy to get it all together , but if I may give a great tip: ” Write down all steps of your manual flow  and then try to translate them into an opalis workflow “

 

Hope it Helps ,

Kenny Buntinx

Forefront Endpoint Protection 2010 : Update Rollup 1 available for download

7:29 pm in ConfigMgr, ConfigMgr 2007, ConfigMgr 2007 R2, ConfigMgr 2012, ConfigMgr SP2, configmgr2007, ConfigMgr2007 R3, embedded, FEP, FEP2010, Installation, SCCM 2007, SCCM 2007 R2, SCCM 2007 R3, SCCM 2007 SP2, SCCM 2012, WES2009 by Kenny Buntinx [MVP]

Update Rollup 1 for Microsoft Forefront Endpoint Protection 2010 introduces new features and updates. These new features and updates are summarized below.

The following list is a summary of the updates in FEP Update Rollup 1 for server functionality.

Finally the Forefront team came up with a solution that since the release of the product they really missed .The following Microsoft website explains how to auto deploy forefront client security definition in a step-by-step guide. aka http://technet.microsoft.com/en-us/library/dd185652.aspx

In this step-by-step guide, they essentially go into the WSUS Console to create an Auto-Acceptance rule. First of all this should make any ConfigMgr admin shiver, as it should have been drilled into your head that you are supposed to do software updates management from the ConfigMgr administrator console. Now, I and many other SCCM admins have never understood why they didn’t solve that in a more elegant manner. The solution works, however has a couple of major drawbacks.

Additionally in a multi distribution point environment, the actual definition updates will always come from the Software update point, whereas normal software updates come from the distribution points. In other words, this impacts scale quite a bit, and forefront definitions come out at a very frequent pace meaning they are hitting you software update point harder than anything else.

The main problem, is that in SCCM 2007 we have no "easy" way to create an Auto-Approval rule. This will be solved in CM12 , until then , for the CM07 they will fix that mistake by update rollup 1. Soon I will launch a blog post to see if this is a real workable solution. So now you will have with Update Rollup 1 a tool that facilitates the use of the Configuration Manager software updates functionality to download FEP definition updates and make them available to client computers running the FEP client software.

In order to use the software updates feature for definition updates, you must perform the following high-level steps:

    • Download and install the Update Rollup 1 package.
    • Configure software updates to download definitions for FEP.
    • Configure the package by which the definition updates will be distributed, and configure the distribution settings for it.
    • Install and configure the FEP Software Update Automation tool.

 

  1. Addition of support for the FEP client software for Windows Embedded 7 and Windows Server 2008 Server Core. For more information on the added client support, see Prerequisites for Deploying Forefront Endpoint Protection on a Client
  2. The following list is a summary of the updates to FEP policies included with Update Rollup 1.
  • Update Rollup 1 for FEP 2010 adds a new FEP policy option to configure definition updates for FEP client computers. After installing Update Rollup 1 for FEP, you can configure FEP policies to update definitions from a Configuration Manager software update point.

    To configure FEP policies to update definitions from a Configuration Manager software update point

    • When you create a new FEP policy or edit an existing FEP policy, the new definition update options appears as follows:

      • When creating a new FEP policy, in the New Policy Wizard, on the Updates page, select the check box for Enable updates from Configuration Manager.
      • When editing an existing FEP policy in a Configuration Manager console that on which you installed the Update Rollup 1 for FEP, in the properties for a FEP policy, on the Updates tab, select the check box for Use Configuration Manager as primary source for definition updates.
  • Addition of two new preconfigured policy templates for the following server workloads:

    • Microsoft Forefront Threat Management Gateway
    • Microsoft Lync 2010

 

You will find the Forefront Endpoint Protection 2010  Update Rollup 1to download at the following location : http://www.microsoft.com/download/en/details.aspx?id=26583

 

Hope it Helps ,

 

Kenny Buntinx

ConfigMgr: Application Virtualization 4.6 SP1 is now supported on Configuration Manager 2007 R2/R3 with Configuration Manager 2007 SP2

5:51 am in App-V, AppV, ConfigMgr, ConfigMgr 2007, ConfigMgr 2007 R2, ConfigMgr SP2, configmgr2007, ConfigMgr2007 R3, R3, sccm, SCCM 2007, SCCM 2007 R2, SCCM 2007 R3, SCCM 2007 SP2, sccm2007, Windows 7, Windows 7 SP1, Windows7 by Kenny Buntinx [MVP]

System Center Configuration Manager 2007 R2 with System Center Configuration Manager SP2 now supports Microsoft Application Virtualization (App-V) 4.6 SP1 Desktop Client and Client for Remote Desktop Services.

This client release enables support for Windows 7 SP1 and Windows Server 2008 R2 SP1.

The following are the limitations and workaround to import App-V packages using Configuration Manager :

Configuration Manager fails to import App-V packages when there is more than one XML in the package folder. App-V Sequencer 4.6 SP1 creates the file Report.xml when creating an App-V package. Configuration Manager expects to find only one xml file in the package folder and will fail when it identifies more than one XML file in the folder. To work around this problem delete the file report.xml manually from the package folder before you import the App-V package.

No software updates are required.

 

Hope it Helps ,

Kenny Buntinx

MMS 2011 is only 5 weeks away and Birds of a Feather session on ConfigMgr R3 Power management : Lessons learned from the field

8:50 pm in BOF, configmgr2007, ConfigMgr2007 R3, mms, MMS-2011, Power Management, R3, SCCM 2007, SCCM 2007 R3 by Kenny Buntinx [MVP]

Hi All,

I have recently deployed Configuration Manager 2007 R3 RTM in production at my TAP customer. Those who attended my presentation at the Belgian System Center Day “http://scug.be/blogs/sccm/archive/2010/09/30/announcement-system-center-day-in-belgium.aspx” have seen already the best practices & lessons learned on implementing R3 Power Management .

I just proposed a birds of a feather session on ConfigMgr R3 Power management : Lessons learned from the field together with our Finish Configmgr MVP Panu Saukko (who also did a large R3 TAP implementation).

We are hoping to get enough votes to put on an ultra-slick, seriously hardcore ConfigMgr 2007 R3 Power management : Lessons learned from the field BOF session at MMS 2011.

I am still trying to get enough votes to raise this up so that it can take place.

 

A short clip from his blog posting to wet your appetite:

  • R3 Power Management Overview
  • R3 Installation flow
  • R3 In-Depth Power Management Implementation notes
  • R3 Power Management Caveats
  • R3 Power management Tips & Tricks
  • R3 Power management Advanced Reporting

 

If you want to see this session go through then vote for this session thru the roof by performing the following procedure:

· Log into CommNet (http://www.mms-2011.com)

· Click on “BOF Survey” in the left Nav

· In the “Commonly Requested Topics” dropdown select “ConfigMgr R3 Power management : Lessons learned from the field”

· Press “Submit”

 

Hope it Helps ,

Kenny Buntinx and Panu Saukko